| 162.45.2366.890.11.1503 Standard 5 Slewing Ring Bearings | Pu:2.032 kN; da:65 min; rs:2 mm; d:55 mm; Dynamic (Cr):71.000 kN; B:29 mm; Static (Cor):44.700 kN; ra:2 max; Weight:1.38 kg; Bearing designation:6311 ; D:120 mm; Oil:6 700 min-1; Grease:5 600 min-1; Da:110 max; |
| 121.36.4750.990.41.1502 Standard 5 Slewing Ring Bearings | Reference grease quantity Gref:4.49 cm³; B:16 mm; Calculation factor f2C:1.08; Mass bearing:0.33 kg; Preload class B GB:90 N; da min.:74.6 mm; Static axial stiffness, preload class C:101 N/µm; Calculation factor f2A:1; db min.:74.6 mm; r3,4 min.:0.3 mm; dn:81.9 mm; Fatigue load limit Pu:0.52 kN; Da max.:95.4 mm; Calculation factor fHC:1.01; Calculation factor f1:1; Basic static load rating C0:20 kN; |
| 61.40.1800.014.29.1503 Standard 5 Slewing Ring Bearings | P120°:7.56 kN; P60°:20.9 kN; R2:12.7 mm; End plug (suffix Y):EPR 3; Initial grease fill:25.515 g; Pa:3.09 kN; RG:1/8 NPT; J max.:177.8 mm; Max. speed for Taconite seal:2175 r/min; ba:24.606 mm; Cap bolt:2 x 7/16-14 UNC; Cap bolt recommended tightening torque:61 N·m; Housing:SAF 509; Taconite seal:TER 18; H:112.713 mm; H2:20.637 mm; S:2.778 mm; Ca:28.804 mm; h:24.606 mm; H1:57.15 mm; |
| 191.20.1800.990.41.1502 Standard 5 Slewing Ring Bearings | Ew:37 mm; Basic static load rating C0:60 kN; Fw:32 mm; Fatigue load limit Pu:7.35 kN; Reference speed:13000 r/min; U:27 mm; Basic dynamic load rating C:28.6 kN; Limiting speed:14000 r/min; Mass needle roller and cage assembly:0.03 kg; |
| 62.50.2240.001.49.1504 Standard 5 Slewing Ring Bearings | Calculation factor kr:0.15; Fw:217 mm; da max.:230 mm; Basic dynamic load rating C:720 kN; Reference speed:2200 r/min; r1,2 min.:4 mm; D:320 mm; C:52 mm; Limiting speed:3600 r/min; Fatigue load limit Pu:88 kN; Limiting value e:0.2; ra max.:3 mm; Da max.:302.2 mm; Basic static load rating C0:850 kN; Mass bearing:14.6 kg; D1 ≈:278.6 mm; Axial load factor Y:0.6; |
| 191.50.6735.990.41.1502 Standard 5 Slewing Ring Bearings | D:68 mm; d:20 mm; Attainable speed:6400 r/min; Basic static load rating C0:51 kN; Fatigue load limit Pu:1.9 kN; D2:43.2 mm; J:53 mm; H:28 mm; r3,4 min.:0.6 mm; Da max.:43 mm; H1:19 mm; Basic dynamic load rating C:27.5 kN; N:6.8 mm; Static axial stiffnes:680 N/µm; Required attachment bolt size (DIN 912):M6; r1,2 min.:0.3 mm; a:73 mm; Mass bearing:0.58 kg; da min.:25 mm; Number of attachment bolts:7; |
| 192.40.3150.990.41.1502 Standard 5 Slewing Ring Bearings | Basic dynamic load rating C:610 kN; da min.:98.2 mm; da max.:98.4 mm; Basic static load rating C0:3050 kN; b1:11.3 mm; r2 min.:1 mm; B:85 mm; d:90 mm; Da min.:131 mm; Sealing solution:Triple-lip seals; rb max.:1 mm; r1 min.:1 mm; α:15 °; b:11.3 mm; Mass plain bearing:6.3 kg; Specific dynamic load factor K:100 N/mm²; Lubricant:Regular relubricatio; M:5 mm; Specific static load factor K0:500 N/mm²; |
| 91.50.2842.990.41.1502 Standard 5 Slewing Ring Bearings | rs (min):2 mm; a:24 mm; d2:65 mm; Static (Coa):136 kN; Dynamic (Ca):112 kN; B:23 mm; Pu:16.590 kN; D:120 mm; r2s (min):0.6 mm; C:20 mm; T:24.75 mm; r1s (min):1.5 mm; |
| 92.50.2644.990.41.1502 Standard 5 Slewing Ring Bearings | Grease:4 500 min-1; Weight:0.74 kg; D:90 mm; B:30.2 mm; da:56 min; d:50 ; Bearing designation:3210 ; Static (Cor):58.400 kN; Da:83 max; Pu:2.655 kN; a:59 mm; ra:1 max; rs (min):1.1 mm; Dynamic (Cr):59.553 kN; Oil:5 300 min-1; |
| 161.28.1600.890.11.1503 Standard 5 Slewing Ring Bearings | Basic static load rating C0:25500 kN; d:279.4 mm; Reference speed:260 r/min; Mass bearing:202 kg; Dynamic load rating C1:9326 kN; Basic dynamic load rating C:6800 kN; H:136.53 mm; D:603.25 mm; r1,2 min.:5 mm; Limiting speed:500 r/min; B:44 mm; Fatigue load limit Pu:1460 kN; r3,4 min.:9.7 mm; da min.:548 mm; Da max.:328 mm; Industry reference:T1120; ra max.:4 mm; Dynamic load rating C90:2418 kN; |
| 91.40.2003.990.11.1502 Standard 5 Slewing Ring Bearings | r, r1,2 min.:0.3 mm; Mass inner ring:0.0059 kg; F:12 mm; d:8 mm; B:12.5 mm; |
| 191.50.6300.990.41.1502 Standard 5 Slewing Ring Bearings | U:35 mm; Fw:125 mm; Basic static load rating C0:260 kN; Basic dynamic load rating C:82.5 kN; Fatigue load limit Pu:30.5 kN; Reference speed:3200 r/min; Ew:133 mm; Mass needle roller and cage assembly:0.28 kg; Limiting speed:3800 r/min; |
| 191.50.3550.990.41.1502 Standard 5 Slewing Ring Bearings | G:M 90x2; B4:18 mm; B:16 mm; d1:82.55 mm; d3:120 mm; d:90 mm; Hydraulic nut:HMV 18 E; B1:52 mm; Mass adapter sleeve assembly:0.97 kg; |
| 8 0340 04 Rollix Slewing Ring Bearings | Da:160 mm; PosiTrac Plus contact element (db shaft position):B10724-113; A2:149.225 mm; Cap bolt recommended tightening torque:203.4 N·m; P180°:42.3 kN; Pa:14.1 kN; db:104.775 mm; P150°:34.7 kN; dc:85.725 mm; R1:60.325 mm; R2:27.781 mm; P60°:101 kN; N1:19.05 mm; Mass pillow block:23.1 kg; P120°:38.3 kN; Appropriate attachment bolt size G:0.625 in; Ca:62.23 mm; Cap bolt:2 x 5/8-11 UNC; |
| No. | Brand | M | F | J | b | K | B | N | D |
| 8 0405 05 | Rollix | - | - | - | - | - | 20 mm | - | - |
| 61.50.2130.001.49.1504 | Standard 5 | - | - | - | - | - | 6 mm | - | 19 mm |
| 191.50.3550.990.41.1502 | Standard 5 | - | - | - | - | - | 16 mm | - | - |
| 191.20.1800.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.36.1900.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | 85 mm |
| 191.32.2800.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 92.35.1900.991.41.1502 | Standard 5 | - | - | - | - | - | - | - | 40 mm |
| 91.40.2003.991.41.1502 | Standard 5 | - | - | - | - | - | 33.5 mm | - | 850 mm |
| 32 0411 01 | Rollix | - | - | - | - | - | 55 mm | - | - |
| 11.35.1750.701.41.1503 | Standard 5 | - | - | - | - | - | - | - | 1400 mm |
| 191.32.4000.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.40.3300.000.11.1502 | Standard 5 | - | - | - | - | - | 60 mm | - | 95 mm |
| 91.40.2199.990.11.1502 | Standard 5 | - | - | - | - | - | 15 mm | - | 16 mm |
| 161.45.2240.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.50.2660.891.41.1503 | Standard 5 | - | 1061.7 mm | - | 30 mm | 16 mm | 880 mm | - | 1310 mm |
| 162.36.2000.890.11.1503 | Standard 5 | - | - | - | - | - | 100 mm | - | 155 mm |
| 12.30.1995.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.50.3000.891.41.1503 | Standard 5 | - | - | - | - | - | 23.5 mm | - | 360 mm |
| 192.25.2240.990.41.1502 | Standard 5 | - | - | - | 60 mm | - | 112 mm | - | - |
| 192.40.3550.990.41.1502 | Standard 5 | - | - | - | - | - | 409.575 mm | - | 736.6 mm |
| 25 0411 01 | Rollix | - | - | - | - | - | 12 mm | - | 40 mm |
| 12.30.2330.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.40.3300.001.41.1502 | Standard 5 | - | - | 88.9 mm | - | - | 49.2 mm | - | - |
| 34 0411 01 | Rollix | - | - | - | - | - | 56 mm | - | - |
| 1 0342 | Rollix | - | - | - | - | - | - | - | 37 mm |
| 12.50.3839.001.49.1502 | Standard 5 | - | - | - | - | - | 49 mm | - | - |
| 121.36.4250.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.35.2620.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 192.50.4500.990.41.1502 | Standard 5 | - | - | - | - | - | 138 mm | - | 420 mm |
| 92.30.1799.990.11.1502 | Standard 5 | - | - | - | - | - | 32 mm | - | - |
37 0411 01 Rollix Slewing Ring Bearings Video
37 0411 01 - Slewing Ring Bearings Manufacturers Suppliers ...
LYMC bearings are the perfect alternative to the most common and well-known brands.
37 0411 01 Slewing Ring Bearings
37 0411 01 Slewing Ring Bearings - External Gear, Ball, External Gear, 342 mm in ID, 505 mm in OD, Find more 37 0411 01 details on our website.Series: External GearWeight: 32 Kg
MOLEX 43650-0411 Headers & Wire Housings MICRO-FIT ...
Find many great new & used options and get the best deals for MOLEX 43650-0411 Headers & Wire Housings MICRO-FIT 3.0 HEADER ( 37 pieces ) at the best online ...
GTCC Regulations
1. DEFENSE TRAVEL MANAGEMENT OFFICE. 1 and. Department of Defense. Government Travel Charge Card Regulations. *Blue text denotes new or updated guidance ...46 pages
APPROVED Records - Louisiana State Police
05/01/2023. Louisiana Department of Public Safety and ... 01/31/2023 ... 37. Westerburg, Joe H. 12/31/2022. 50. Hilton, Robert. 11/15/2022.38 pages
Briggs and Stratton 286707-0411-01 Parts Diagrams
Briggs and Stratton 286707-0411-01 Exploded View parts lookup by model. ... (LMT 1, 2, 3, 4, 5, 7, 37, 38, 39, 40, 41, 77, 78, 79, 80, 81).
37 0411 01 回转支承轴承- Rollix & 养贞交汇图| 养贞轴承
产品型号, 37 0411 01. 齿轮, 外齿轮. 几何学. 外径（D） (DR), 505. 内径(d)(d) (di), 342. 高度(H), 56. 重量(kg), 32. 内圈孔尺寸(Bi). 齿轮节圆直径(D2), 495.
37 0411 01 转盘轴承| 342mm x 505mm x 转盘轴承| 养贞轴承
37 0411 01 转盘轴承 ; 内环的孔数(ni), 24 ; Pitch Diameter Of Gear (D2), 495 mm ; Number Of Gear Teeth (z2), 99 ; 齿轮齿的压力角(α), 20° ; Tooth Form, Droite.
CCS Numbered Letters - DHCS
Note: Supersedes CCS NL 37-1292 ... 11-0818, 08-01-18, Benefits, Chapter 3.37 - CCS Provider Core, Special Care ... Note: Supersedes CCS N.L. 02-0411.